Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Bedienungsanleitung PDF herunterladen (Seite 89)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

PN 613-50507-00 Rev C Page 89 of 224

Address Table

Displays the list of IP interfaces and their IP addresses on the router.

Note - The Address Table sub-menu option does not display the correct parameters. Instead,

it displays the sub-menu option name as a parameter with a value of 'noSuchName'.

Route Table

Displays the IP routing table on the router.

Note - The current firmware version does not allow the user to configure the Destination Port

Number parameter. Attempting to configure this parameter will result in the error messages:

"The error occurred with 'Set' operation. Error: gen Error." or "The error occurred with 'Set'

operation. Error: bad value."

Note - The current firmware version does not allow the following parameters to be

configured:

• Destination Metric 1

• Destination Metric 2

• Destination Metric 3

• Destination Metric 4

• Next Hop Address

• Routing Type

• Route Updated Seconds

• Routing Mask

• Destination Metric 5

Attempting to configure these parameters will result in the error message: "The error

occurred with 'Set' operation. Error: gen Error."

IP Statistics

Displays statistics about IP routing, including the number of IP datagrams received.

Note - The current firmware version does not allow the Forwarding Status and the Default

TTL parameters to be configured. Attempting to configure these will result in the error

message: "The error occurred with 'Set' operation. Error: gen Error."

ICMP Statistics

Displays ICMP statistics.

UDP Statistics

Displays UDP statistics.

TCP Statistics

Displays TCP statistics.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 223 224

Keine Kommentare

Allied-telesis AT-VIEW PLUS 2.3 DEVICE MANAGEMENT Bedienungsanleitung Seite 89