Allied-telesis AT-S95 CLI Bedienungsanleitung PDF herunterladen (Seite 141)

100

101

IP Addressing Commands

Page 141

no ip domain-lookup

Parameters

This command has no arguments or keywords.

Default Configuration

The default configuration is set to enabled.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example enables IP Domain Naming System (DNS)-based host name-to-address translation.

ip host

The ip host Global Configuration mode command defines static host name-to-address mapping in the host cache.

Use the no form of this command to remove the name-to-address mapping.

Syntax

ip host name address

no ip host name

Parameters

•

name — Specifies the name of the host. (Range: 1 - 158 characters)

• address — Specifies the associated IP address.

Default Configuration

No host is defined.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example defines a static host name-to-address mapping in the host cache.

console(config)# ip domain-lookup

console(config)#

ip host

accounting.website.com 176.10.23.1

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 391 392

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S95 CLI Bedienungsanleitung Seite 141

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S95 CLI