Allied-telesis AT-S95 CLI (AT-8000GS Series) Bedienungsanleitung PDF herunterladen (Seite 272)

100

101

Page 272

Allied Telesis

AT-8000GS Command Line Interface User’s Guide

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

All devices in an MST region must have the same VLAN mapping, configuration revision number and name.

Example

The following example configures an MST region.

instance (mst)

The instance MST Configuration mode command maps VLANS to an MST instance.

Syntax

instance instance-id {add | remove} vlan vlan-range

Parameters

•

instance-ID—ID of the MST instance (Range: 1 - 7).

• vlan-range—VLANs to be added to or removed from the specified MST instance. To specify a range of

VLANs, use a hyphen. To specify a series of VLANs, use a comma. (Range: 1 - 4094).

Default Configuration

VLANs are mapped to the common and internal spanning tree (CIST) instance (instance 0).

Command Modes

MST Configuration mode

User Guidelines

All VLANs that are not explicitly mapped to an MST instance are mapped to the common and internal spanning

tree (CIST) instance (instance 0) and cannot be unmapped from the CIST.

For two or more devices to be in the same MST region, they must have the same VLAN mapping, the same

configuration revision number, and the same name.

console(config)#

spanning-tree mst configuration

console(config-mst) #

instance

add vlan

10-20

console(config-mst) #

name

region1

console(config-mst) #

revision

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 396 397

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S95 CLI (AT-8000GS Series) Bedienungsanleitung Seite 272

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S95 CLI (AT-8000GS Series)