Allied-telesis AT-S95 CLI (AT-8000GS Series) Bedienungsanleitung PDF herunterladen (Seite 179)

100

101

LLDP Commands

Page 179

Example

The following example specifies that the management address will be advertised from an interface as

192.168.0.1.

lldp med enable

The lldp med enable Interface Configuration mode command enables LLDP Media Endpoint Discovery (MED) on

an interface. Use the no form of this command to disable LLDP MED on an interface.

Syntax

lldp med enable [tlv1 … tlv3]

no lldp med enable

Parameters

•

tlv — Specifies the TLV that should be included. Available TLVs are: network-policy, location and poe-pse.

The TLV capabilities are always included if LLDP MED is enabled.

Default Configuration

LLDP MED is disabled.

Command Mode

Interface Configuration (Ethernet) mode.

User Guidelines

There are no user guidelines for this command.

Example

The following example enables LLDP MED on an interface as network-policy.

lldp med network-policy (global)

The lldp med network-policy Global Configuration mode command defines LLDP MED network policy. Use the

no form of this command to remove LLDP MED network policy.

Syntax

lldp med network-policy number application [vlan id] [vlan-type {tagged|untagged}] [up priority] [dscp value]

no lldp med network-policy number

console(config)# interface ethernet g5

console(config-if)# lldp management-address 192.168.0.1

console(config)# interface ethernet g5

console(config-if)# lldp med enable network-policy

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 396 397

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S95 CLI (AT-8000GS Series) Bedienungsanleitung Seite 179

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S95 CLI (AT-8000GS Series)