Allied-telesis AT-S94 CLI (AT-8000S Series) Bedienungsanleitung PDF herunterladen (Seite 175)

100

101

LLDP Commands

Page 174

Chapter 17.LLDP Commands

lldp enable (global)

The lldp enable Global Configuration mode command enables the Link Layer Discovery Protocol (LLDP). Use the

no form of this command to disable LLDP.

Syntax

lldp enable

no lldp enable

Parameters

This command has no parameter settings.

Default Configuration

LLDP is enabled.

Command Mode

Global Configuration mode.

User Guidelines

There are no guidelines for this command.

Example

The following example enables LLDP.

lldp enable (interface)

The lldp enable Interface Configuration mode command enables LLDP on an interface. Use the no form of this

command to disable LLDP on an interface.

Syntax

lldp enable [rx|tx|both]

no lldp enable

Parameters

•

rx — Receives only LLDP packets.

• tx —Transmits only LLDP packets.

• both — Receives and transmits LLDP packets (default).

console (config)# lldp enable

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 401 402

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S94 CLI (AT-8000S Series) Bedienungsanleitung Seite 175

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S94 CLI (AT-8000S Series)