Allied-telesis AT-S94 CLI (AT-8000S Series) Bedienungsanleitung PDF herunterladen (Seite 117)

100

101

Ethernet Configuration Commands

Page 116

Syntax

port storm-control broadcast enable

no port storm-control broadcast enable

Parameters

This command has no arguments or keywords.

Default Configuration

Broadcast storm control is disabled.

Command Modes

Interface Configuration (Ethernet) mode

User Guidelines

Use the port storm-control broadcast rate Interface Configuration (Ethernet) mode command, to set the

maximum allowable Broadcast rate.

Use the port storm-control include-multicast Interface Configuration (Ethernet) mode command to enable

counting Multicast packets.

Examples

The following example enables Broadcast storm control on Ethernet port 1/e5.

port storm-control broadcast rate

The port storm-control broadcast rate Interface Configuration (Ethernet) mode command configures the

maximum Broadcast rate. Use the no form of this command to return to the default configuration.

Syntax

port storm-control broadcast rate rate

no port storm-control broadcast rate

Parameters

•

rate — Maximum kilobits per second of Broadcast and Multicast traffic on a port. (Range: 70 - 100000)

Default Configuration

The default storm control Broadcast rate is 3500 Kbits/Sec.

Command Mode

Interface Configuration (Ethernet) mode

console(config)#

interface ethernet

1/e5

console(config-if)#

port storm-control broadcast enable

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 401 402

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S94 CLI (AT-8000S Series) Bedienungsanleitung Seite 117

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S94 CLI (AT-8000S Series)