Allied-telesis AT-S60 Bedienungsanleitung PDF herunterladen (Seite 160)

Chapter 14: RSTP Commands

158

migrationcheck This parameter resets a RSTP port, allowing it to

send RSTP BPDUs. When an RSTP bridge receives

STP BPDUs on an RSTP port, the port transmits STP

BPDUs. The RSTP port continues to transmit STP

BPDUs indefinitely. Set the migrationcheck

parameter to yes to reset the RSTP port to transmit

RSTP BPDUs.

Note

Each time a RSTP port is reset by receiving STP BPDUs, set the

migrationcheck parameter to yes, allowing the port to send RSTP

BPDUs.

Description

This command sets a port’s RSTP settings.

Examples

The following command sets port cost to 1,000,000 and port priority to

224 (increment 14) on Port 4 on the line card in Slot 9:

set rstp port=9.4 portcost=1000000 portpriority=14

The following command changes Ports 6 to 8 on the line card in Slot 10

so they are not considered edge ports:

set rstp port=10.6-8 edgeport=no

The following command returns Port 7 on the line card in Slot 2 to the

default RSTP settings:

set rstp port=2.7 default

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 302 303

Keine Kommentare

Allied-telesis AT-S60 Bedienungsanleitung Seite 160