Allied-telesis AT-WL2411 Bedienungsanleitung PDF herunterladen (Seite 78)

Configuring the Spanning Tree

Configuring the Spanning Tree Parameters

Access points automatically configure themselves into a self-organized

network using a spanning tree topology. As devices are added to or

removed from the network, the access points automatically reconfigure

to maintain reliable operation. The spanning tree provides efficient,

loop-free forwarding of frames through the network and allows rapid

roaming of wireless end devices.

To configure the spanning tree parameters, perform the following

procedure:

1. From the Main Menu, select Spanning Tree Settings. The Spanning

Tree Settings screen as shown in Figure 28 is displayed.

Figure 28 Spanning Tree Settings Screen

2. Configure the spanning tree parameters. The spanning tree

parameters are defined below.

AP Name

Enter a unique name for this access point. The name can be from

1 to 16 characters. The default is the access point serial number.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 235 236

Keine Kommentare

Allied-telesis AT-WL2411 Bedienungsanleitung Seite 78