Allied-telesis AT-S86 Bedienungsanleitung PDF herunterladen (Seite 116)

Chapter 11: Security

116

Setting Up a Dial-In User

You should set up a dial-in user account for each person who needs to

access the switch for management purposes.

Adding a Dial-in

User

To set up a user’s dial-in access, perform the following procedure:

1. From the main menu, select Security > Dial-in User.

The Dial-in User page is shown in Figure 36.

Figure 36. Dial-In User Page

2. In the User Name field, type a name for the user.

3. In the Password field, type a password for the user, and re-type the

name in the Confirm Password field.

4. In the Dynamic VLAN field, enter the name of the VLAN which you will

allow the user to access.

5. Click Add.

6. Do one of the following:

 Click OK to save the changes.

 Click Reload to clear the changes and start over.

7. To permanently save these settings in the configuration file, from the

main menu, select Save Configuration.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 147 148

Keine Kommentare

Allied-telesis AT-S86 Bedienungsanleitung Seite 116