Allied-telesis AT-MCR1 Bedienungsanleitung PDF herunterladen (Seite 26)

Chapter 2: Installation

Installing the Chassis Under a Table (AC

Models Only)

The AT-MCR1 chassis can be mounted under a table using the

mounting brackets shipped with the chassis.

Note

Make sure that the under-table location provides easy access

for installing the twisted pair, fiber optic, and power cables to

and from the chassis.

Note

Before you install the AT-MCR1 chassis under a table, install

the cables. For cabling instructions, refer to the installation

guide that is shipped with the Allied Telesis media converter.

To install an AT-MCR1 chassis under a table, perform the

following procedure:

1. If attached, remove the rubber feet and power cord from the

chassis.

2. Select a location under a table and mark two hole locations

for the mounting screws.

Caution

The mounting brackets provided in the chassis package must

be used to securely install the chassis under the table.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

Keine Kommentare

Allied-telesis AT-MCR1 Bedienungsanleitung Seite 26