Allied-telesis AT-MCF2300 Bedienungsanleitung PDF herunterladen (Seite 80)

Chapter 5: AT-MCF2000S Stacking Module

80 Section I: Features

Figure 40. Chassis ID DIP Switches on the AT-MCF2000S Stacking

Module

When choosing the ID numbers for the units in a stack, there is only one

rule that must be followed: each number has to be unique. Other than that,

you’re free to choose whatever numbers you want. They do not have to be

sequential or reflect the order of the devices in the stack. Of course, you’ll

find the units easier to identify, and so reduce the chance of performing a

configuration command on the wrong device, if you have a numbering

scheme.

Figure 41 is an example of a stack of four AT-MCF2000 and AT-MCF2300

Chassis with ID numbers. The chassis with the management module is

assigned the ID 0 and the other units, which have stacking modules, are

assigned the ID numbers 1, 2, and 3.

Figure 41. Chassis ID Numbers

T- M

200

PORT

CTIVITY

1400

OFF ON

CHASSIS_ID

SW2

Unit with the

AT-MCF2000M

Management

Module

Units with the AT-MCF2000S

Stacking Module

ID 0 ID 1 ID 2 ID 3

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 189 190

Keine Kommentare

Allied-telesis AT-MCF2300 Bedienungsanleitung Seite 80