Allied-telesis AT-MCF2300 Bedienungsanleitung PDF herunterladen (Seite 59)

AT-MCF2000 Media Converter Series Installation Guide

Section I: Features 59

10/100/1000Base-T Management Port

The 10/100/1000Base-T Management port is a standard Ethernet, Fast

Ethernet, and Gigabit Ethernet port that is used by the module to

communicate with your network. You have to connect this port to a device

on your network, such as a Fast Ethernet or Gigabit Ethernet switch, if the

module will be performing any of these management functions:

❒ Remote management using the Telnet or Secure Shell (SSH)

application protocol

❒ Uploading or downloading files to its file system using a TFTP server.

❒ Setting its date and time from a Network Time Protocol (NTP) server.

❒ Sending events to a syslog server.

❒ Obtaining an IP address configuration from a DHCP or BOOTP server.

❒ Sending or receiving TCP/IP ping requests from network devices.

❒ Sending Simple Network Management Protocol (SNMP) traps to an

SNMP management program.

The port has a standard RJ-45 8-pin connector and can operate at 10,

100, or 1000 Mbps in either half- or full-duplex mode. The cable

requirements for the port are listed in Table 13. For the port pinouts, refer

to “10/100/1000Base-T Port Pin-outs” on page 176.

The default setting for the Management port is Auto-Negotiation with auto-

MDI/MDI-X. At the default setting, the port, which is IEEE 802.3u

compliant, sets its speed and duplex mode automatically with Auto-

Negotiation. You can disable Auto-Negotiation and set the speed and

duplex mode manually.

Table 13. Cable Requirements for the 10/100/1000Base-T Management

Port

Speed Cable Type

Maximum

Operating Distance

10 Mbps Standard TIA/EIA 568-B-

compliant Category 3 or better

shielded or unshielded cabling

with 100 ohm impedance and a

frequency of 16 MHz.

100 m (328 ft)

100 or 1000

Mbps

Standard TIA/EIA 568-B-

compliant Enhanced Category

5 (Cat 5e) shielded or

unshielded cabling with 100

ohm impedance and a

frequency of 100 MHz.

100 m (328 ft)

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 189 190

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-MCF2300 Bedienungsanleitung Seite 59

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-MCF2300