Allied-telesis AT-MCF2300 Bedienungsanleitung PDF herunterladen (Seite 112)

Chapter 13: Installing the AT-MCF2000M Management Module

112 Section II: Installation

2. Unpack the AT-MCF2000M Management Module from its shipping

container and verify the package contents, listed in Table 27.

Note

You should retain the packaging material in the event you need to

return the unit to Allied Telesis.

3. If you plan to build a stack that will have two management modules,

you must change the chassis ID number of one of the modules from

the default setting 0 to 31 as shown in Figure 55. If there will be just

one management card in the stack, you can leave the jumper at the

default setting. For background information, refer to “Chassis ID

Jumper” on page 66 or the AT-S85 and AT-S97 Management

Software Command Line User’s Guide.

Note

At the time this guide was published, a stack could have only one

management module. For further information, refer to the Software

Release Notes.

Table 27. AT-MCF2000M Management Module

Component Description

One AT-MCF2000M

Module

One management cable

with DIN-8 and DB-9

connectors

One Installation and User

Documentation CD

-M

CF20

/100/1

000

-T

RS-232

USY

100

LIN

CT 10/

0 L

HDX

LIN

CTIVITY

1423

1417

1405

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 189 190

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-MCF2300 Bedienungsanleitung Seite 112

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-MCF2300