Allied-telesis AT-10408XP Bedienungsanleitung PDF herunterladen (Seite 20)

Chapter 1: Overview

SD Card Slot

LED

The SD card slot has one LED as shown in Figure 5 and described in

Table 3.

Figure 5. SD Card Slot LED

Table 2. Management Port LED

LED Color State Description

L/A Green On A valid link has been established on the

port at 1000 Mbps.

Blinking The port is transmitting or receiving data.

Amber On A valid link has been established on the

port at 10 or 100 Mbps.

Blinking The port is transmitting or receiving data.

None Off No link.

Table 3. SD Card Slot LED

LED Color State Description

Normal Green On The SD card is inserted in the slot and

has been successfully detected.

Busy Green Blinking An SD card is inserted in the slot and is

being accessed by the switch. DO NOT

REMOVE THE SD CARD.

Fault Amber Blinking The SD card is not valid or the system

cannot successfully read or write to the

SD card.

1208

STATUS

FAULT

MASTER

BUSY

NORMAL

FAULT

LED

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Keine Kommentare

Allied-telesis AT-10408XP Bedienungsanleitung Seite 20