Allied Telesis AT-2450 Series Installationsanleitung PDF herunterladen (Seite 32)

Manually Installing a Network Adapter Driver

Installation Guidelines

Please review the following guidelines before you begin to manually

install a network adapter driver on your computer:

" If your computer is running Windows 98, 2000, Me, or XP and has

a CD-ROM drive, you can run AT-Setup to automatically install an

adapter driver. This program is included on the CardAssistant CD.

For instructions, refer to AT-Setup for Windows 98, 2000, Me, or XP

on page 21.

" If you are installing multiple network adapter cards in a Windows

98, 2000, Me, or XP operating system, you must install a separate

adapter driver for each adapter card. You can either run AT-Setup

for each adapter card you are installing or you can manually install

the adapter drivers. Refer to Running AT-Setup on page 24 or

Manually Installing a Network Adapter Driver on page 31.

" If the computer in which you are installing the adapter card does

not have a CD-ROM drive, you must create a driver installation

disk to install the adapter driver. Refer to Creating a Driver

Installation Disk on page 33 for instructions.

" Allied Telesyn adapter cards are PCI-compliant. The adapter card’s

operating parameters, such as interrupt level and memory range,

are set automatically by the computer so that they do not conflict

with other devices in your computer. Do not change any of the

operating parameters of a adapter card without a full

understanding of the parameters’ functions.

" Allied Telesyn adapter cards are auto-negotiation compliant for

both speed (for dual-speed adapter cards) and duplex mode on

the twisted pair port. This means that the adapter card will

automatically set the speed and duplex mode of the port to

match the speed and duplex mode of the end-node (for example,

an Ethernet hub or switch) to which the adapter port is

connected. The fiber optic port is not auto-negotiation compliant,

so it must be manually configured for both speed and duplex

mode.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 121 122

Keine Kommentare

Allied Telesis AT-2450 Series Installationsanleitung Seite 32