Allied-telesis SwitchBlade x3106 Bedienungsanleitung PDF herunterladen (Seite 170)

100

101

Chapter 7: Powering On the Chassis

170

3. Use an 8 mm wrench to remove the grounding post nut and washer,

shown in Figure 120, from the power supply.

Figure 120. Removing the Nut and Washer from the Grounding Post

4. Attach the grounding lug and wire to the ground post and secure them

with the nut and washer removed in the previous step, and an 8 mm

wrench.

Review the following before installing the grounding wire:

 You should angle the wire to the right so that you can open the

plastic window to access the positive and negative terminals on the

terminal block.

 You may route the cable either above or below the locking handle.

The grounding wire is illustrated in Figure 121 on page 171.

Grounding

post

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 259 260

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis SwitchBlade x3106 Bedienungsanleitung Seite 170

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis SwitchBlade x3106