Allied-telesis AT-WCC200G Bedienungsanleitung

Cardbus AdapterAT-WCC200G◆User’s GuideFOR WINDOWS 98/ME/XP/2000VERSION 1.10®PN 613-50579-00 Rev A

Preface10How This Guide is OrganizedThis guide contains the following sections:Introduction, describes the AT-WCC200G adapter.Unpacking and Setup, hel

AT-WCC200G User’s Guide11Document ConventionsThis guide uses several conventions that you should become familiar with before you begin to install the

Preface12Where to Find Related GuidesThe Allied Telesyn web site at www.alliedtelesyn.com offers you an easy way to access the most recent documentati

AT-WCC200G User’s Guide13Contacting Allied TelesynThis section provides Allied Telesyn contact information for technical support as well as sales or c

15Allied Telesyn AT-WCC200G Cardbus AdapterIntroductionCongratulations on your purchase of this AT-WCC200G Wireless Cardbus Adapter. This manual helps

16Unpacking and SetupThis section provides unpacking and setup information for the AT-WCC200G adapter.Unpacking Open the box of the Wireless Cardbus A

AT-WCC200G User’s Guide17Hardware InstallationLED PWR (Power)The PWR LED is green when the AT-WCC200G adapter is receiving power, otherwise it is OFF.

18Software InstallationInstalling the AT-WCC200 DriverFor Windows 98/ME/XP/20001. Verify that the AT-WCC200G adapter is securely inserted into the Car

AT-WCC200G User’s Guide19The installation process will scan the CD and prompt you to select the appropriate driver for the operating system. For examp

Copyright © 2004 Allied Telesyn, Inc.All rights reserved. No part of this publication may be reproduced without prior written permission from Allied T

20The AT-WCC200G drivers are not Microsoft WHQL certified, therefore the below message will appear.This is a generic Windows message indicating that t

AT-WCC200G User’s Guide215. Select Finish to complete the AT-WCC200G Driver Installation.The AT-WCC200G driver is now installed.Installing the Wireles

222. Select Install Software. The menu below is displayed. 3. Select AT-WCC200G Wireless Cardbus Adapter. The following InstallShield Wizard screen is

AT-WCC200G User’s Guide234. The following InstallShield Wizard screen is displayed. Select Next to continue. The installation program will help you to

245. To accept the default destination folder, select Next. Otherwise, select Browse to change location and then select Next.6. In the Program Folders

AT-WCC200G User’s Guide25When the Setup Status is complete, the screen shown below is displayed.7. Select the country domain from the pull-down menu a

269. The following screen is displayed when installation is complete. Select Finish to complete installation.The WIRELESS LAN utility is now installed

AT-WCC200G User’s Guide27Wireless Utility SettingsWith the Wireless Cardbus Adapter utility, users can configure all the functions provided by the Wir

28Status TabThe Status tab shows the status of the Cardbus Adapter. It shows where the device is connected, Network mode, Channel, Transmit Rate, and

AT-WCC200G User’s Guide29Configuration TabThe Configuration tab allows you to configure Network and Security.Under Network you can configure: ❑ Networ

3Regulatory Notes and StatementsWireless LAN, Health and Authorization For Use Radio frequency electromagnetic energy is emitted from Wireless LAN dev

30❑ ChannelIt shows radio channel numbers that are used for Wireless LAN networking.The channel number can be set only under the Ad-Hoc operation mode

AT-WCC200G User’s Guide31NoteAfter all the settings are completed, select Apply to save the setting. Advanced TabThe Advanced tab allows you to contro

32❑ Power SavingSelect between OFF, Normal, or Maximum.❑ Transmit PowerBy selecting the Transmit Power, you can select the Radio Frequency output powe

AT-WCC200G User’s Guide33Profile TabThe Profile tab allows you to set values for all parameters by selecting a previously defined profile. Type a name

34Network TabThe Network tab shows all the wireless devices around your AT-WCC200G adapter. The information of the wireless devices includes SSID, MAC

AT-WCC200G User’s Guide35Statistic TabThe Statistic tab shows the real-time transmit and receive packets of the Cardbus adapter.

36About TabThe About tab shows the Device Name, Regulatory Domain, Driver Version, Firmware Version, MAC Address, and Utility Version.

AT-WCC200G User’s Guide37Technical SpecificationsGeneralRadio Technology IEEE 802.11b Direct Sequence Spread Spectrum (DSSS)IEEE 802.11g Orthogonal Fr

38Continuous Current Consumption 480 mA typical for receive mode, 650 mA typical for transmit modeTemperature Operating: 0o~ 40o C, Storage: -25o~ 70o

AT-WCC200G User’s Guide39Regulatory DomainsThis appendix lists the IEEE 802.11g channels supported by the world’s regulatory domains.Channel Identifie

Regulatory Notes and Statements4FCC Radio Frequency Exposure StatementThis Wireless LAN radio device has been evaluated under FCC Bulletin OET 65 and

AT-WCC200G User’s Guide5CautionTo maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum

7Table of ContentsRegulatory Notes and Statements ...

9PrefaceThis user’s guide contains instructions on how to use and install an Allied Telesyn AT-WCC200G Wireless CardBus Adapter.