Allied-telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT Bedienungsanleitung PDF herunterladen (Seite 194)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

Device Manager LEDs for Rapier G6F

LED State Description

PWR

Green

Red

The switch is receiving power from the main power supply.

Main power supply is either off or has failed.

RPS

Green

Red

Gray

The switch is receiving power from the redundant power

supply.

RPS has failed.

RPS is not installed or RPS monitoring is disabled.

DUPLEX

Green

Orange

The port is operating at full duplex.

The port is operating at half duplex.

Note - The current firmware version does not allow AT-View Plus Device Manager to support

the Reset button.

Note - Please refer to Uplink Modules for the operations and behavior of the uplink modules

installed in this device.

Note - To turn RPS monitoring on or off on the switch, from the switch command line interface

enter the command SET SYSTEM RPSMONITOR={ON|OFF}. To see whether RPS monitoring

is on, use the command SHOW SYSTEM. To turn on RPS monitoring using SNMP, set the

fanAndPsRpsMonitoringStatus variable to on.

Agent Menu

From the Agent menu, you can view and edit the system information for the switch, or log into

the CLI using Telnet.

System Info

Displays basic system information, including system name, location, contact and

description.

Power Supply Info

Displays information about the power supply, redundant power supply and power supply

monitoring.

File List

Displays a list of the files in the switch's file system.

Config File Name

Displays the file name of the start-up configuration file.

PN 613-50665-00 Rev B Page 194 of 277

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 276 277

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT Bedienungsanleitung Seite 194

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-VIEW PLUS 3.1 DEVICE MANAGEMENT