Allied-telesis AT-S97 Bedienungsanleitung PDF herunterladen (Seite 169)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide

169

FILE SHOW

Syntax

file show filesystem=system://

chassis

slot

filename

Parameters

system Specifies the chassis and module with the file system to

display. This parameter has the following parts:

chassis Specifies the ID number of the chassis. In

version 1.3.0, the chassis ID number is 0 or

31.

slot Specifies the ID number or letter of the slot

with the module. Possible values are:

m Identifies the slot with the

AT-MCF2000M Management

Module.

1 or 2 Specifies a slot with a media

converter module. In the

AT-MCF2000 Chassis, the left

slot is 1 and the right slot is 2.

filename Specifies the filenames to view. The

filename is case sensitive. You can use the

asterisk (*) as a wildcard.

To view the ID and slot numbers of the devices in a chassis

or stack, refer to “SYSTEM SHOW CHASSIS” on page 86

or “SYSTEM SHOW CLUSTER” on page 88.

Privilege Levels

Administrator, read-write, and read-only.

Description

This command displays the names of the files in the file system on a

management module. An example is shown in Figure 34. You might view

the file system to verify the spelling and case of the filename of a master

configuration file prior to designating it as the active master configuration

file or uploading it to a TFTP server.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 217 218

Keine Kommentare

Allied-telesis AT-S97 Bedienungsanleitung Seite 169