Allied-telesis AT-S97 Bedienungsanleitung PDF herunterladen (Seite 147)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide

147

CONFIG SHOW

Syntax

config show

Parameters

None

Privilege Levels

Administrator, read-write, and read-only.

Description

This command displays the names of the current and active master

configuration files on the management module. An example is shown in

Figure 31.

Figure 31. CONFIG SHOW Command

The “Last configuration file ran” field displays the name of the master

configuration file used by the management module to configure the

chassis during the last reset or power cycle.

The “Current set configuration file” field displays the name of the active

master configuration file. It is this file that the management module

updates whenever the CONFIG SAVE command is issued. This is also the

file that will be used to configure the chassis during the next reset or power

cycle.

Here is an example of how the process works. Assume the chassis is

currently using a master configuration file called “unit12.cfg,” as illustrated

in Figure 31.

Now assume you decided to configure the settings on the chassis modules

using a different master file called “mcf24.cfg.” If, after specifying the file

as the new active configuration file with the CONFIG SET command, you

were to issue the CONFIG SHOW command, you would see the

information in Figure 32.

Last configuration file ran ............. unit12.cfg

Current set configuration file .......... unit12.cfg (Exists)

Active master configuration file

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 217 218

Keine Kommentare

Allied-telesis AT-S97 Bedienungsanleitung Seite 147