Allied-telesis AT-S63 Bedienungsanleitung PDF herunterladen (Seite 98)

100

101

Chapter 5: Enhanced Stacking

98 Section I: Basic Features

Setting a Switch’s Enhanced Stacking Status

The enhanced stacking status of the switch can be master switch, slave

switch, or unavailable. Each status is described below:

❑ Master switch - A master switch of a stack can be used to manage

all the other switches in a subnet. After you establish a local or

remote management session with the master switch, you can

access and manage all the switches in the subnet.

A master switch must have a unique IP address. You can manually

assign a master switch an IP address or activate the BOOTP and

DHCP services on the switch.

❑ Slave switch - A slave switch can be remotely managed through a

master switch. It does not need an IP address or subnet mask.

❑ Unavailable - A switch with an unavailable stacking status cannot

be remotely managed through a master switch. A switch with this

designation can be managed locally. To be managed remotely, a

switch with an unavailable stacking status must be assigned a

unique IP address.

Note

The default setting for a switch is slave.

Note

You cannot change the stacking status of a switch accessed through

enhanced stacking. To change the stacking status of a switch that

does not have an IP address or subnet mask, such as a slave switch,

you must use a local management session. If the switch has an IP

address and subnet mask, such as a master switch, you can use

either a local or a Telnet management session.

To adjust a switch’s enhanced stacking status, perform the following

procedure:

1. From the Main Menu, type 9 to select Enhanced Stacking.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 709 710

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S63 Bedienungsanleitung Seite 98

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S63