Allied-telesis AT-S62 Bedienungsanleitung PDF herunterladen (Seite 811)

100

101

AT-S62 User’s Guide

Section VIII: Web Browser Management 811

IP Address and Encryption Key

Use these fields to specify the IP addresses and encryption

secrets of up to three network servers containing TACACS+

server software. You can leave an encryption field blank if you

entered the server’s secret in the Global Secret field.

c. After you have finished configuring the parameters, click Apply.

d. To enable the authentication feature on the switch, click the

Enable Server-based Authentication check box. A check in the box

indicates that this feature is enabled. No check indicate the

feature is disabled. The default is disabled.

e. To permanently save the changes, use the Save Changes button

in the General tab. For directions, refer to Saving Your Parameter

Changes on page 577.

6. To configure RADIUS, do the following:

a. In lower section of the Server-based Authentication tab, click

RADIUS Configuration and click Configure.

The RADIUS Client Configuration page is shown in Figure 297.

Figure 298 RADIUS Configuration Page

b. Configure the parameters as needed. They are described below.

Global Encryption Key

If all of the TACACS+ servers have the same encryption secret,

you can enter the key here. If the servers have different keys,

you must specify each key when you specify a server’s IP

address.

1 2 ... 806 807 808 809 810 811 812 813 814 815 816 ... 861 862

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S62 Bedienungsanleitung Seite 811

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S62