Allied-telesis AT-S62 Bedienungsanleitung Seite 161

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 862
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 160
AT-S62 User’s Guide
Section II: Advanced Operations 161
Downloading the AT-S62 Image File onto a Switch
This section contains two procedures for downloading a new AT-S62
image file onto the switch. They are:
Downloading the AT-S62 Image from a Local Management
Session on page 162
Downloading the AT-S62 Image from a Telnet Management
Session on page 165
Caution
Installing a new AT-S62 image file will invoke a switch reset. Some
network traffic may be lost.
You can use either Xmodem or TFTP when downloading files from a
local management session. You must use TFTP when downloading files
from a Telnet management session.
Here are guidelines that apply to both Xmodem and TFTP downloads:
The current configuration of a switch is retained when a new
AT-S62 software image is installed. If you want to return a switch
to its default configuration values, refer to Returning the AT-S62
Software to the Factory Default Values on page 76.
The AT-S62 image file contains the bootloader for the switch. You
cannot load the image file and bootloader separately.
Here are guidelines that apply to an Xmodem download:
Xmodem can only download the image file onto the switch on
which you started the local management session. You cannot use
Xmodem to download a new image file onto a switch accessed
through enhanced stacking.
The new AT-S62 image file must be stored on the computer or
terminal connected to the RS232 Terminal Port on the switch.
Here are guidelines that apply to a TFTP download:
There must be a node on your network that contains the TFTP
server software and the new AT-S39 image file to be downloaded
must be stored on the server.
You should start the TFTP server software before you begin the
download procedure.
The switch on which you are downloading the new image file
must have an IP address and subnet mask, such as a master switch
Seitenansicht 160
1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 861 862

Kommentare zu diesen Handbüchern

Keine Kommentare