Allied-telesis AT-S60 Bedienungsanleitung PDF herunterladen (Seite 680)

100

101

Chapter 39: STP, RSTP, and MSTP

Section VI: Web Browser Management 680

Each time an RSTP port is reset by receiving STP BPDUs, you need

to reset the RSTP port, allowing it to send RSTP BPDUs.

Note

MCHECK is only valid when the RSTP mode is enabled. This option

does not apply when the switch is in STP mode.

Point-to-Point

This parameter defines whether the port is functioning as a point-

to-point port. The default setting is Auto Detect, which sets port

cost depending on the speed of the port. Default values are 100

for a 10 Mbps port, 10 for a 100 Mbps port, and 4 for a 1 Gbps port.

For an explanation of this parameter, refer to Point-to-Point Ports

and Edge Ports on page 234.

Edge Port

This parameter defines whether the port is functioning as an edge

port. For an explanation of this parameter, refer to Point-to-Point

Ports and Edge Ports on page 234.

8. Once you have configured the parameters, click Apply.

To save your changes, return to the General Tab and click Save

Changes. The changes you made are saved on the switch.

1 2 ... 675 676 677 678 679 680 681 682 683 684 685 ... 857 858

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S60 Bedienungsanleitung Seite 680

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S60