Allied-telesis AT-MCF12VF, SM Bedienungsanleitung PDF herunterladen (Seite 13)

AT-MCF6xx and AT-MCF12xx Installation Guide

Twisted Pair and Fiber Optic Ports

The twisted pair and fiber optic ports on the unit are paired together (see

Figure 3). Each pair is referred to as a “channel” and each channel functions

as an independent media converter. The AT-MCF6xx unit has six channels

while the AT-MCF12xx unit has twelve channels.

Figure 3 Twisted Pair Port and Fiber Optic Port Channel (Model AT-MCF12SC)

Twisted Pair Ports

The twisted pair ports are IEEE 802.3 10Base-T compatible, and thus operate

at 10 Mbps only. The ports require Category 3 or better cabling and allow for a

distance of 100 meters (328 feet).

The devices that you connect to the twisted pair ports must operate at

10 Mbps. To connect a switch, hub, or router to a twisted pair port requires a

straight-through cable. To connect a workstation to a twisted pair port

requires a crossover cable.

10Base-FL Fiber Optic Port

The 10Base-FL fiber optic ports operate at 10 Mbps and, depending on the

model, function with multimode or single-mode fiber optic cabling.

The type of connector on the fiber optic ports will depend on the system model

you purchased. Refer to Table 1 on page 2 for a list of the available types of

connectors.

RESET

7-12 LINK TEST

NORM

TEST

MCF12SC

10Base-TX/FX Media Converter

MANAGEMENT

LNK

REC

STATION HUBOR

10Base-T

RS232

POWER

BCKP

MAIN

Ready

Tx Rx Tx Rx Tx Rx Tx Rx Tx RxTx Rx

T-LNK

F-LNK

Active

RESET

1-6 LINK TEST

NORM

TEST

Tx Rx

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-MCF12VF, SM Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-MCF12VF, SM