Allied-telesis AT-LMC10ST Bedienungsanleitung PDF herunterladen (Seite 13)

AT-LMC10SC and AT-LMC10ST Installation Guide

Key Features

The media converters have the following key features:

❑ LEDs for unit and port status

❑ MDI/MDI-X selector switch on RJ-45 port

❑ Automatic half- or full-duplex mode operation with 10Base-T or

10Base-FL fiber optic port

❑ Maximum transmission distance of fiber connection is 2 kilometers at

full-duplex mode

❑ External AC/DC power adapter

❑ Standard size for use in an AT-MCR12 chassis

Status LEDs

Table 2 defines the media converter’s LEDs.

Table 2 Status LEDs

MDI/MDI-X Selector Switch

An RJ-45 port on a 10 Mbps Ethernet network device can have one of two

possible wiring configurations: MDI or MDI-X. The RJ-45 port on a PC, router

or bridge is typically wired as MDI, while the twisted pair port on a switch or

hub is usually MDI-X.

To connect two 10 Mbps network devices together that have dissimilar port

wiring configurations, such as MDI to MDI-X, you use a straight-through

cable. To connect two network devices that have an RJ-45 port with the same

wiring configuration, such as MDI to MDI, you use a crossover cable.

The RJ-45 port on the media converter features an MDI/MDI-X switch. You

can use this switch to configure the twisted pair port on the media converter

as either MDI or MDI-X. This feature allows you to use a straight-through

cable regardless of the type of end-node connected to the port.

LED State Color Description

PWR ON Green Power is applied to the media converter.

REC ON Green Data is received on the port.

LNK ON Green A link has been established on the port.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Keine Kommentare

Allied-telesis AT-LMC10ST Bedienungsanleitung Seite 13