Allied-telesis AT-IFS802SP Bedienungsanleitung PDF herunterladen (Seite 36)

32 AT-IFS802SP-80 User Manual

BackupCongurationinterface

YoucanbackupthecurrentcongurationfromashROMtotheTFTPserverforthepurposeof

recoveringthecongurationlater.Ithelpsyoutoavoidwastingtimeonconguringthesettingsby

backinguptheconguration.

TFTP Server IP Address: Type in the TFTP server IP.•

BackupFileName:Typeinthelename.•

Click•

6.7.3BackupConguration

A p p l y

6.8 System Event Log

This page allows the user to decide whether to send the system event log, and select the mode which

the system event log will be sent to client only, server only, or both client and server. What kind of

eventlogwillbeissuedtotheclient/serverdependsontheselectionontheEventCongurationtab.

Therearevetypesofevent—DeviceColdStart,DeviceWarmStart,AuthenticationFailure,X-Ring

Topology Change, and Port Event—available to be issued as the event log.

Syslog Client Mode• : Selectthesystemlog mode—ClientOnly,ServerOnly,orBoth.‘Client

Only’ means the system event log will only be sent to this interface of the switch, but on the other

hand‘ServerOnly’meansthesystemlogwillonlybesenttotheremotesystemlogserverwith

itsIPassigned.Ifthemodeissetin‘Both’,thesystemeventlogwillbesenttotheremoteserver

and this interface.

System Log Server IP Address• :Whenthe‘SyslogMode’itemissetasServerOnly/Both,the

user has to assign the system log server IP address to which the log will be sent.

Click to refresh the event log displaying area.•

Click to clear all the current event logs.•

Make sure the selected mode is correct, and click to have the setting take effect.•

6.8.1SyslogConguration

R e l o a d

C l e a r

A p p l y

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 100 101

Keine Kommentare

Allied-telesis AT-IFS802SP Bedienungsanleitung Seite 36