Allied-telesis AT-IFS802SP/POE Bedienungsanleitung PDF herunterladen (Seite 28)

24 AT-IFS802SP/POE(W)-80 User Manual

5.3 Login in the Console Interface

When the connection between Switch and PC is ready, turn on the PC and run a terminal emulation

program or HyperTerminal and congure its communication parameters to match the following

default characteristics of the console port:

Baud Rate: 9600 bps

Data Bits: 8

Parity: none

Stop Bit: 1

Flow control: None

Havingnishedtheparametersettings,click‘OK’.Whentheblankscreenshowsup,pressEnterkey

to have the login prompt appears. Key in‘manager’ (default value) for Username and“friend” for

Password (use Enter key to switch), then press Enter and the Main Menu of console management

appears.Pleaseseebelowgureforloginscreen.

5.4 CLI Management

The system supports the console management—CLI command. After you log in on to the system, you

will see a command prompt. To enter CLI management interface, type in “enable” command.

The following table lists the CLI commands and description.

CLI command interface

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 104 105

Keine Kommentare

Allied-telesis AT-IFS802SP/POE Bedienungsanleitung Seite 28