
AT-GS950/16 Web Interface User Guide
161
Group Status
To display the LACP Group Status, perform the following procedure:
1. Select the Bridge folder.
The Bridge folder expands.
2. From the Bridge folder, select the Trunk Config folder.
The Trunk Config folder expands.
3. From the Trunk Config folder, select LACP Group Status.
The LACP Group Status Page is displayed. See Figure 51.
Figure 51. LACP Group Status Page
Go to “Create a Port Trunk” on page 149 to directly change the
parameters on this page:
Kommentare zu diesen Handbüchern