Allied-telesis AT-GS950/10PS Bedienungsanleitung PDF herunterladen (Seite 55)

AT-GS950/10PS, AT-GS950/16PS, and AT-GS950/48PS Switches Installation Guide

Powering On the Switch

To power on the switch, perform the following procedure:

1. Plug the power cord into the AC power connector on the back of the

switch, as shown in Figure 29.

Figure 29. Plugging in the AC Power Cord

2. Plug the other end of the power cord into a wall outlet.

Warning

Power cord is used as a disconnection device. To de-energize

equipment, disconnect the power cord.  E3

Note

Pluggable Equipment. The socket outlet shall be installed near the

equipment and shall be easily accessible.  E5

3. Verify that the POWER LED is green. If the LED is OFF, see Chapter

3, “Troubleshooting” on page 57.

The switch is now powered on and ready for network operations. For

information on how to manage the switch, see one of the following

manuals:

 AT-S110 Web Interface User’s Guide for the AT-GS950/10PS

Switch

 AT-S111 Web Interface User’s Guide for the AT-GS950/48PS

Switch

 AT-S112 Web Interface User’s Guide for the AT-GS950/16PS

Switch

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 63 64

Keine Kommentare

Allied-telesis AT-GS950/10PS Bedienungsanleitung Seite 55