Allied-telesis AT-GS950/10PS Bedienungsanleitung PDF herunterladen (Seite 46)

Chapter 2: Installation

Installing the Switch in an Equipment Rack

To install the switch in a standard 19-inch equipment rack, perform the

following procedure:

1. If the rubber feet are attached to the bottom of the switch, remove

them using a flat-head screwdriver.

2. Attach the two rack mount brackets to the sides of the switch using the

eight bracket screws that come with the unit. There are four possible

positions in which the brackets may be installed.

Figure 20. Attaching the Rack-Mount Brackets to the Switch

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 63 64

Keine Kommentare

Allied-telesis AT-GS950/10PS Bedienungsanleitung Seite 46