Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT Bedienungsanleitung PDF herunterladen (Seite 297)

100

101

AlliedView™-EMS 3.10 Device Management Guide Page 297 of 367

Note - The value of the Port Speed parameter of a port with an established link

automatically changes to '10Mbps' when the value of its Port Mode parameter is

changed from 'auto' to 'manual'.

Note - The Port Ingress Rate Limit and Port Egress Rate Limit parameters are not

applicable to this line card and should be ignored.

Note - Configuring the Port MDIX parameter of the 10/100/1000Base-TX port

causes the chassis to restart. As a result, a timeout error may be encountered.

Remote Port Info

Note - The current firmware version does not return correct values for the

parameters under this table.

AT-CV10x

AT-CV101: 100TX to 100FX (ST)

AT-CV102: 100TX to 100FX (SC)

LED State Description

LT Green Link Test is enabled

SML Green Smart Missing Link is enabled

ML Green Missing Link is enabled

LCDS Green Line Card Dip Switch is enabled

Module Info

Note - The current firmware version does not allow the Module Operation Mode

parameter to be configured.

Note -The current firmware version does not return the correct value for the

Module MAC Address parameter.

Port Info

Note - The current firmware version does not allow any of the parameters under

this table to be configured.

1 2 ... 292 293 294 295 296 297 298 299 300 301 302 ... 366 367

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT Bedienungsanleitung Seite 297

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT