Allied-telesis AT-S62 Bedienungsanleitung PDF herunterladen (Seite 167)

100

101

AT-S62 Management Software Web Browser Interface User’s Guide

Section II: Advanced Operations 167

The Modify Traffic Class page is shown in Figure 45.

Figure 45. Modify Traffic Class Page

5. Configure the following parameters as necessary. For descriptions of

the parameters, refer to “Creating a Traffic Class” on page 162.

6. Click Apply.

The changes are immediately implemented in the traffic class.

7. To permanently save your changes, select the Save Config menu

selection.

Deleting a Traffic

Class

This procedure explains how to delete a traffic class. If the traffic class you

want to delete is already part of a QoS policy assigned to one or more

switch ports, you must first modify the policy by removing the port

assignments before you can delete the traffic class. You can reassign the

ports back to the policy after you have deleted the traffic class.

To delete a traffic class, perform the following procedure:

1. From the Home Page, select Configuration.

2. From the Configuration menu, select the Services option.

3. Select the Traffic Class tab.

The Traffic Class tab is shown in Figure 43 on page 162.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 371 372

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied-telesis AT-S62 Bedienungsanleitung Seite 167

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Allied-telesis AT-S62