Allied-telesis AT-S101 Bedienungsanleitung PDF herunterladen (Seite 107)

AT-S101 Management Software User’s Guide

107

Creating a Host Table

Use the following procedure to create a Host Table.

1. From the menu on the left side of the page, select the SNMP folder.

The SNMP folder expands.

2. From the SNMP folder, select Host Table.

The Host Table Page is shown in Figure 32.

Figure 32. Host Table Page

3. To specify an entry number, type a value between 1 and 10 in the

Entry number field.

4. For an SNMP community that you previously defined in the Community

Table page, enter an IP address.

The IP address must be in the xxx.xxx.xxx.xxx format.

5. Select a community name from the pull-down menu next to the

Community Name field. Then click Add.

The new host is added to the table.

6. From the menu on the left side of the page, select Save Configuration

to Flash to save your changes.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 237 238

Keine Kommentare

Allied-telesis AT-S101 Bedienungsanleitung Seite 107