Allied-telesis AT-MCF2000M Bedienungsanleitung PDF herunterladen (Seite 24)

Chapter 1: Overview

Stack Port

You can simplify the management of two or more

AT-MCF2000 chassis by interconnecting the devices with

the Stack port and managing them as a single unit. Some of

the benefits of the Stack port and the stacking feature are:

 A stack requires only one AT-MCF2000M Management

Module.

 A stack can consist of up to eight AT-MCF2000 Multi-

channel Media Converter Chassis and 16 media

converter modules.

 A stack requires only one IP configuration.

 You can add or remove a chassis from the stack without

interrupting the flow of network traffic through the

channels on the media converter modules.

Stack with a

Single

Management

Module

A stack must have one AT-MCF2000M Management

Module. The module must be installed in a chassis at one

end of the stack. The other units are connected to the stack

with the AT-MCF2000S Stacking Module, which has two

stacking ports.

The media converter units are connected together in a

daisy chain topology using the Stack ports. The Stack port

on the AT-MCF2000M Management Module must be

connected to a Stack port on the AT-MCF2000S Stacking

Module in the next chassis, which must be connected to a

Stack port in the next chassis, and so on. The topology

does not support redundant connections or loops.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 69 70

Keine Kommentare

Allied-telesis AT-MCF2000M Bedienungsanleitung Seite 24