Allied-telesis AT-FS708LE Bedienungsanleitung PDF herunterladen (Seite 33)

AT-FS708LE Installation Guide

❑ Check to be sure that you are using the

correct type of cable: Category 3, 4, or 5 for

10 Mbps operation and Category 5 cable

for 100 Mbps operation.

❑ Verify that the cable has not been cut or

damaged.

3. If the LNK/ACT LED for a port is ON but

there is a communication problem to the end-

node connected to the port, such as the loss of

data, check the following:

❑ Check to be sure that the distance

between the switch and the connected

network device is no greater than 100

meters (328 feet).

❑ Verify that you are using the correct type

of cable: Category 3, 4, or 5 for 10 Mbps

operation and Category 5 cable for 100

Mbps operation.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 49 50

Keine Kommentare

Allied-telesis AT-FS708LE Bedienungsanleitung Seite 33