Allied-telesis AT-8550 Bedienungsanleitung PDF herunterladen (Seite 9)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Command Guide

FDB Commands

Command Description

clear fdb {<mac_address> | vlan <name> |

<portlist>}

Clears dynamic FDB entries that match the filter. When no options

are specified, the command clears all FDB entries.

config fdb agingtime <number> Configures the FDB aging time. The range is 15 through 1,000,000

seconds. The default value is 300 seconds. A value of 0 indicates that

the entry should never be aged out.

create fdbentry <mac_address> vlan <name>

[blackhole | <portlist> | dynamic] {qosprofile

<qosname>}

Creates an FDB entry. Specify the following:

❑

mac_address — Device MAC address, using colon

separated bytes.

❑

name — VLAN associated with MAC address.

❑

blackhole — Configures the MAC address as a blackhole

entry.

❑

portlist — Port numbers associated with MAC address.

❑

dynamic — Specifies that the entry will be learned

dynamically. Used to associated a QoS profile with a

dynamically learned entry.

❑

qosname — QoS profile associated with MAC address.

If more than one port number is associated with a permanent MAC

entry, packets are multicast to the multiple destinations.

delete fdbentry <mac_address> vlan <name> Deletes a permanent FDB entry.

show fdb {<mac_address> | vlan <name> |

<portlist> | permanent | qos}

Displays the switch FDB contents.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Keine Kommentare

Allied-telesis AT-8550 Bedienungsanleitung Seite 9