Allied-telesis AT-8550 Bedienungsanleitung PDF herunterladen (Seite 19)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Command Guide

BootP, DHCP Proxy, and UDP Profile Commands

Command Description

config bootprelay add <ipaddress> Adds the IP destination address to forward BOOTP packets.

config bootprelay delete [<ipaddress> | all] Removes one or all IP destination addresses for forwarding BOOTP

packets.

config udp-profile <profile_name> add

<udp_port> [vlan <name> | ipaddress

<dest_ipaddress>]

Adds a forwarding entry to the specified UDP-forwarding profile

name. All broadcast packets sent to <udp_port> are forwarded to

either the destination IP address (unicast or subnet directed

broadcast) or to the specified VLAN as an all-ones broadcast.

config udp-profile <profile-name> delete

<udp_port> [vlan <name> | ipaddress

<dest_ipaddress>]

Deletes a forwarding entry from the specified udp-profile name.

config vlan <name> udp-profile

<profile_name>

Assigns a UDP-forwarding profile to the source VLAN. Once the UDP

profile is associated with the VLAN, the switch picks up any

broadcast UDP packets that matches with the user configured UDP

port number, and forwards those packets to the user-defined

destination. If the UDP port is the DHCP/BOOTP port number,

appropriate DHCP/BOOTP proxy functions are invoked.

create udp-profile <profile_name> Creates a UDP-forwarding profile. You must use a unique name for

the UDP-forwarding profile.

delete udp-profile <profile_name> Deletes a UDP-forwarding profile.

disable bootprelay Disables the forwarding of BOOTP requests.

enable bootprelay Enables the forwarding of BOOTP and Dynamic Host Configuration

Protocol (DHCP) requests.

show udp-profile {<profile_name>} Displays the profile names, input rules of UDP port, destination IP

address, or VLAN and the source VLANs to which the profile is

applied.

unconfig udp-profile vlan [<name> | all] Removes the UDP-forwarding profile configuration for one or all

VLANs.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Keine Kommentare

Allied-telesis AT-8550 Bedienungsanleitung Seite 19