Allied-telesis AT-3714FXL Bedienungsanleitung PDF herunterladen (Seite 14)

Product Description

1-4

Hardware Features

The switches have the following major hardware features:

24 or 16 10Base-T ports for the AT-3726XL/AT-3716XL, plus

one built-in 10/100Base-TX port capable of full- or half-duplex

configurable through auto-negotiation (IEEE 802.3u standard)

or manually settleable.

12 10Base-FL ports (SC/ST) for the AT-3714FXL, capable of full-

or half-duplex, manually configurable.

Additional 100Base modular port provides the option of a

100Base-TX or 100Base-FX port using one of the MDAs.

Non-blocking, clear-channel architecture delivers wire-speed

bridging and delivers up to 880 Mbps aggregate bandwidth

for AT-3726XL, up to 720 Mbps for the AT-3716XL, and up to

640 Mbps for the AT-3714FXL to workstations, servers, routers

and between switches.

Shared-memory architecture of up to 4 MB of packet buffer

using cost-effective EDO DRAM (dependent on model

number) which virtually eliminates packet loss.

Store-and-forward switching mode allows for full error

checking.

Hardware-base support for static entries and self-learning of

active MAC addresses and their associated Virtual LANs

(VLANs).

Stores 2K MAC addresses in CAM.

Port mirroring.

VLANs configuration provides broadcast traffic control,

firewall protection, and simplifies adds, moves, and changes.

Supports thirty-two VLANs configurable by port or by tagging.

Supports IEEE 802.1Q VLAN tagging.

Half-duplex back pressure.

Embedded 25 MHz 486 CPU supports management functions.

Sufficient system memory which includes DRAMs and Flash

memory for convenient firmware upgrades.

In-band configuration of switch through Telnet, Remote

Omega.

In-band configuration through web, web-based Omega.

Out-of-band configuration through RS232 connector, Local

Omega.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Keine Kommentare

Allied-telesis AT-3714FXL Bedienungsanleitung Seite 14