Allied Telesis AT-x510-52GTX Installationsanleitung PDF herunterladen (Seite 68)

Chapter 4: Cabling the Networking Ports

6. Verify the position of the handle on the SFP transceiver. If the

transceiver is in a top slot, the handle should be in the upright position,

as shown in Figure 27. If the transceiver is in a bottom slot, the handle

should be in the down position.

Figure 27. Positioning the SFP or SFP+ Handle in the Upright Position

7. Connect the fiber optic cable to the transceiver, as shown in Figure 28.

The connector on the cable should fit snugly into the port, and the tab

should lock the connector into place.

Figure 28. Connecting a Fiber Optic Cable to an SFP or SFP+ Transceiver

8. Repeat this procedure to install additional transceivers.

SFP Handle

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 89 90

Keine Kommentare

Allied Telesis AT-x510-52GTX Installationsanleitung Seite 68