Allied Telesis AT-x510-52GTX Installationsanleitung PDF herunterladen (Seite 42)

Chapter 1: Overview

Console Port

The Console port is used to establish a management session with the

switch to configure its features and parameter settings. This type of

management uses serial RS-232 and is commonly referred to as local or

out-of-band management because it is not conducted over your network.

To perform local management, you must be at the location of the switch

and must use the management cable included with the switch.

To establish a local management session with the switch, connect a

terminal or a personal computer with a terminal emulation program to the

Console port, which has an RJ-45 style (8P8C) connector, using the

provided management cable. The cable has RJ-45 RJ-style (8P8C) and

DB-9 (D-sub 9-pin) connectors.

The Console port is set to the following specifications:

 Default baud rate: 9600 bps (Range is 9600 to 115200 bps)

 Data bits: 8

 Parity: None

 Stop bits: 1

 Flow control: None

Note

These settings are for a DEC VT100 or ANSI terminal, or an

equivalent terminal emulation program.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 89 90

Keine Kommentare

Allied Telesis AT-x510-52GTX Installationsanleitung Seite 42