Allied Telesis AT-x510-52GTX Installationsanleitung PDF herunterladen (Seite 37)

x510 Series Installation Guide for Stand-alone Switches

The LEDs are described in Table 8.

LEDs for the

SFP+ Slots

The LEDs for the SFP+ slots are located between the slots, as shown in

Figure 9. Each SFP+ slot has one LED. The left-hand LED is for the top

slot and the right-hand LED is for the bottom slot.

Figure 9. SFP+ Slot LEDs

The LEDs are described in Table 9 on page 38.

Table 8. SFP Slot LEDs on the AT-x510-28GSX Switch

LED State Description

Link/Activity Off The slot is empty, the SFP transceiver

has not established a link to a network

device, or the LEDs are turned off. To turn

on the LEDs, use the eco-friendly button.

Solid green The SFP transceiver has established a

link at 10 Mbps, 1000 Mbps or 10 Gbps to

a network device.

Flashing

green

The SFP transceiver is receiving or

transmitting packets to a network device.

SFP Slot LEDs

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 89 90

Keine Kommentare

Allied Telesis AT-x510-52GTX Installationsanleitung Seite 37