Allied Telesis AT-x510-52GTX Installationsanleitung PDF herunterladen (Seite 17)

x510 Series Installation Guide for Stand-alone Switches

 Supports single-port BiDi 1000Base-LX SFP transceivers

 Supports 1000Base-ZX SFP transceivers

 Supports 10/100/1000Base-T twisted pair transceivers

Note

SFP transceivers must be purchased separately. For a list of

supported transceivers, contact your Allied Telesis distributor or

reseller.

SFP+ Slots Here are the basic features of the four SFP+ slots on the switches:

 Supports 10Gbps, 10GBase-SR/LR fiber optic transceivers

 Supports 10Gbps AT-SP10TW direct connect twinax cables with

SFP+ transceiver-style connectors

 Supports 1000Base-SX/LX SFP transceivers

 Supports single-port BiDi 1000Base-LX SFP transceivers

 Supports 1000Base-ZX SFP transceivers

Note

The SFP+ slots do not support 100Mbps 100Base-FX transceivers.

Note

SFP and SFP+ transceivers must be purchased separately. For a

list of supported transceivers, contact your Allied Telesis distributor

or reseller.

Note

SFP+ slots 27 and 28 on the 28-port switches and slots 51 and 52

on the 52-port switches are initially configured as stacking slots for

the VCStack feature. If you intend to use the switch as a stand-alone

unit, you must disable the VCStack feature before you can use the

slots with standard SFP or SFP+ transceivers. The configuration

instructions are provided later in this guide, in “Configuring the

Switch for Stand-alone Operations” on page 74.

Stacking Slots Two of the SFP+ slots can be used to create a VCStack of up to four

switches. The slots support these stacking transceivers when the switch is

in the stacking mode:

 AT-StackXS/1.0 Twisted Pair Transceiver - 1 meter

 AT-StackOP/0.3 Fiber Optic Transceiver - 300 meters

 AT-StackOP/9.0 Fiber Optic Transceiver - 9 kilometers

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 89 90

Keine Kommentare

Allied Telesis AT-x510-52GTX Installationsanleitung Seite 17