Allied Telesis Switch AT-9000/28 Bedienungsanleitung PDF herunterladen (Seite 44)

Chapter 3: Basic Switch Parameters

The following fields are displayed:

 Startup Config— Displays the name of the active boot

configuration file, which for the switch in the example is “boot.cfg.”

 File Name— Indicates the name of the configuration files.

 File Size— Lists the file size in bytes.

 Last Modify— Indicates the date the configuration file was last

modified. The format is year, month, date.

3. Use the pull-down menu to select the active configuration file. Then

click Apply.

The file you select is the active configuration file after you reboot the

switch.

4. Click SAVE

Uploading a

Configuration

File

To upload a configuration file onto the switch, do the following:

1. From the home page, click the System tab.

For an example of the System tab, see Figure 11 on page 41.

2. From the System tab, select Configuration Files.

For an example of the Configuration Files page, See Figure 12 on

page 43.

3. Click Upload.

The File Upload page is displayed. See Figure 13.

Figure 13. File Upload Page

4. Click Browse to select a file to upload onto the switch.

5. Select the file and then click Upload.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 247 248

Keine Kommentare

Allied Telesis Switch AT-9000/28 Bedienungsanleitung Seite 44