Allied Telesis AT-S94 Betriebsanweisung PDF herunterladen (Seite 119)

Configuring Interfaces

Configuring VLANs

Page 119

Defining VLAN Properties

The VLAN Page provides information and global parameters for configuring and working with VLANs.

To configure a VLAN:

1. Click Layer 2 > VLAN. The VLAN Page opens:

Figure 74: VLAN Page

The VLAN Page is divided into two sections. The first section contains the following fields:

• VLAN ID — Defines the VLAN ID. Possible VLAN IDs are 1-4095, in which “1” is reserved for the default

VLAN, and “4095” is reserved as the “discard” VLAN.

• VLAN Name — Displays the user-defined VLAN name.

• VLAN Type — Displays the VLAN type. The possible field values are:

– Dynamic — Indicates the VLAN was dynamically created through GARP.

– Static — Indicates the VLAN is user-defined.

– Default — Indicates the VLAN is the default VLAN.

• 802.1x Authentication — Enables the 802.1x authentication method on the VLAN. The possible field

values are:

– Enable — Enables 802.1x authentication.

– Disable — Disables 802.1x authentication. This is the default value.

• Delete VLAN — Removes the specified VLAN. The possible field values are:

– Checked — Deletes the specified VLAN.

– Unchecked — Maintains the specified VLAN.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 253 254

Keine Kommentare

Allied Telesis AT-S94 Betriebsanweisung Seite 119