Allied Telesis Switch AT-S79 Bedienungsanleitung Seite 193

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 242
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 192
AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 193
Enabling and Disabling a Port Trunk
This procedure enables and disables a port trunk. Note the following
before performing this procedure:
Do not enable a port trunk until after you have configured the trunk on
both switches.
Do not connect the cables to the ports on the switches until after you
have configured and enabled the trunk on both switches.
Note
If you are disabling a port trunk, be sure to first disconnect all cables
from the ports of the trunk. Leaving the cables connected can create
loops in your network topology because the ports of a disabled port
trunk function as normal network ports, forwarding individual
network traffic.
To enable or disable a port trunk, perform the following procedure:
1. From the Advanced Config menu, select Trunk Config.
The Trunk Configuration page is shown in Figure 54.
2. Click the status of the port trunk and change it to Enable or Disable.
3. Click Apply.
Seitenansicht 192
1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 241 242

Kommentare zu diesen Handbüchern

Keine Kommentare