Allied Telesis AT-9900 Series Bedienungsanleitung PDF herunterladen (Seite 21)

Features in 276-02 21

Version 276-03

C613-10474-00 REV B

CR00012307

VLAN 3 Previously, when MSTP was configured it was not possible to delete ports from

VLANs in the MSTP CIST, unless MSTP was first disabled.

This issue has been resolved. Deleting such ports is now permitted.

---YYYYYY-

CR00012314

TACACS+,

Tel net

3 If a user connects to the router or switch via telnet and is authenticated using

TACACS+, previously the rem_addr field in the TACACS+ packets contained the

text “Telnet x” (where x was the number of the telnet session) instead of the

remote IP address.

This issue has been resolved. The rem_addr field now contains the remote IP

address.

YYYYYYYYYY

CR00012322

Classifier 3 If a user created a classifier that specified an IP address without specifying a

protocol (for example, create classifier=1 ipda=20.20.20.10/24), and saved

the configuration with the create config command, the resulting configuration

file included a value for protocol (for example, create class=1 prot="ip"

ipda=20.20.20.10/24). This prevented the router or switch from applying the

classifier to IPsec tunnelled traffic.

This issue has been resolved. The protocol value is no longer added to such

classifiers, which leaves them matching the default of any.

YYYY------

CR00012329

Asyn 3 When the router sent a continuous stream of data over a permanent assignment,

and the ASYN port at the receiving end of the tunnel was significantly slower

than the ASYN port at the sending end, the sending router eventually rebooted.

This was because the router had to queue packets and eventually ran out of

memory.

This issue has been resolved. The router now stops receiving ASYN data when

memory is low, so its queue does not get too full.

YYY- ------

CR00012359

Switch 3 You can now return the description of a switch port to its original blank value by

entering the following command:

set switch port=port-number description=

and providing no value for the description parameter.

Y- YYYYYYYY

CR Module Level Description

AR44x / AR450

AR7x5

AR750S

Rapier i

AT-8800

AT-8600

AT-8700XL

AT-8948

AT-9900

AT-9800

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare

Allied Telesis AT-9900 Series Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Allied Telesis AT-9900 Series