Allied Telesis AT-2931SX Installationsanleitung PDF herunterladen (Seite 56)

Chapter 5: Setting Advanced Properties

Figure 21. Advanced Tab

3. From the Properties list, select 802.1p QOS.

4. From the Values list, select one of the following:

 Enable - Enables the 802.1p QOS property.

 Disable - Disables the 802.1p QOS property. This is the default.

Note

Enabling 802.1p QOS requires an 802.1p-aware switch.

5. Click OK.

6. If prompted to restart your computer, click Yes.

Although it is not necessary to reboot the system for new adapter

properties to take effect, rebooting is recommended to reinitialize all

registers.

7. Verify that the adapter port LEDs operate as described in “LEDs” on

page 18.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 139 140

Keine Kommentare

Allied Telesis AT-2931SX Installationsanleitung Seite 56