Allied Telesis AT-8324 Installationsanleitung PDF herunterladen (Seite 3)

AT-S25 Version 1.5.6 Software Release Notes

PN 613-50303-00 Rev A 3 Allied Telesyn, Inc.

• Auto-Negotiation

A change to the parameter settings of a port could cause a failure of the port to auto-

negotiate correctly with the end node. This problem has been resolved.

Operational Notes

• Web Browser User Name

The management software prompts you for both a user name and a password when you

start a web browser management session if a password has been assigned to the Omega

interface. Entering a user name is optional. The name can be from 0 to 20 alphanumeric

characters. The user name should not contain any special characters, such as spaces,

asterisks, or exclamation points. A user name is not saved by the switch and is not

maintained across different management sessions.

• Omega Password

The default password for the Omega interface is no password. Be sure to observe the

following guidelines when changing the Omega password:

• The password should be limited to alphanumeric characters (A to Z, a to z, and 1 to 9).

• The password should not contain any special characters, such as spaces, asterisks, or

exclamation points.

• The password should not exceed 20 characters.

• Telnet session

You cannot establish a Telnet management session from a management station that is

connected to a slave switch of a stack. A Telnet session is possible only from a

management station connected to a master switch.

• Global Configuration

The Global Config option for replicating the configuration of one port onto all the switch

ports has been removed from the management software.

• STP and Port Trunks

Do not activate STP on ports that will be part of a port trunk.

• Quitting from the Omega Interface

You should always exit from the Omega interface whenever you are not actively managing

a stack. This can help improve the performance of a stack.

• VLANs and STP

You must disable STP on all ports on the switch before creating, modifying, or deleting a

VLAN. Otherwise, the switch may stop forwarding traffic. Once you have finished creating

or modifying a VLAN, you can enable STP again.

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Allied Telesis AT-8324 Installationsanleitung Seite 3