Allied Telesis AT-FS232 Installationsanleitung PDF herunterladen (Seite 26)

Installing the Bridging Converter

Planning the Installation

Be sure to observe the following guidelines when planning the installation of

your bridging converter.

❑ The end-node connected to the 100Base-FX fiber optic port must be

able to operate at 100 Mbps.

❑ The end-node connected to the 10Base-T/100Base-TX twisted pair

port can operate at either 10 Mbps or 100 Mbps.

❑ The twisted pair cabling must be kept away from sources of electrical

noise, such as radios, transmitters, power lines, broadband amplifiers,

electrical motor, and fluorescent fixtures.

Refer to Table 3 for the cabling specifications for the twisted pair port.

Table 3 10Base-T/100Base-TX Twisted Pair Cabling Specifications

Operating Mode Cable Type

Maximum Operating

Distance

10Base-T Shielded or unshielded Category 3 or better 100 m (328 ft)

100Base-TX Shielded or unshielded Category 5 or better 100 m (328 ft)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 73 74

Keine Kommentare

Allied Telesis AT-FS232 Installationsanleitung Seite 26